VECTOFOX FIELD NOTES
Why traced SVG text loses small details
Automatic tracing follows visible regions; it does not recover the original font. Small letter holes, faint strokes and low-resolution corners can disappear for different reasons. Diagnose the source of the loss before raising every setting.
VectoFox documentation · Updated
Start by checking the source pixels
If a letter counter is already filled in the source, tracing cannot know that the designer intended a hole. If two strokes are blurred together, the algorithm sees one region. A larger screenshot of the same small bitmap does not add the missing shape information.
The tiny block glyph fixture is only 64 × 40 pixels and uses original geometric letter shapes, not an OCR model or a sampled font. Its A and O openings survive the balanced probe checks. This is a useful positive control: the evidence does not support a blanket claim that every small letter fails.

Faint is different from thin
The line fixture includes an alpha=100 stroke, followed by fully opaque strokes one, two and four pixels wide. In this run, the faint line disappears at every tested preset, while the opaque one-pixel line survives its center probe. Thickness alone does not explain the difference.
VectoFox makes pixels below alpha 128 transparent. It also applies a fixed luminance threshold in black-and-white mode. Raising the path detail control does not alter either threshold. If the source is a pale pencil line or a partially transparent brush stroke, prepare a stronger, more opaque source before tracing.

| Sample | Preset | Input bytes | SVG bytes | Visible paths | Est. endpoints | Median ms | RGB error |
|---|---|---|---|---|---|---|---|
| Tiny block glyphs | compact | 151 | 1,087 | 3 | 56 | 7.4 | 0 |
| Tiny block glyphs | balanced | 151 | 1,087 | 3 | 56 | 7.6 | 0 |
| Tiny block glyphs | detailed | 151 | 1,087 | 3 | 56 | 7.3 | 0 |
| Faint and thin strokes | compact | 188 | 430 | 3 | 15 | 6.8 | 0.54 |
| Faint and thin strokes | balanced | 188 | 430 | 3 | 15 | 7.6 | 0.54 |
| Faint and thin strokes | detailed | 188 | 430 | 3 | 15 | 7.2 | 0.54 |
Estimated endpoints count path-segment endpoints, not curve handles, and exclude close commands and clip definitions. RGB error is the average channel difference on white (0–255), not a perceptual ranking. Lower counts and smaller files can hide lost features.
Understand the large-image tracing limit
VectoFox proportionally reduces images with a dimension greater than 1280 pixels before tracing. The exported SVG keeps the original display dimensions, but the smaller tracing grid cannot retain every tiny feature from a much larger source.
Crop closely around the actual logo or lettering before opening it. That can give its important features more of the available tracing grid. The published fixtures on this page are all below the limit, so they do not measure large-source downsampling. Treat the resizing explanation as the converter's documented behavior rather than a result of this small test.
Adjust settings for a specific missing feature
In color mode, increase the color limit if an essential color region has merged with its neighbor. Increase path detail if a visible corner, notch or small component disappears. Compare the same letter with the slider after each adjustment; a smoother edge can be less faithful to its original shape.
If a thin join is present in the PNG but lost in the SVG, try the fine-detail drawing preset and inspect the complete path. If it remains missing, return to the source or correct the exported geometry in an editor. A point probe can confirm a location but cannot prove that an entire word remains legible.
Know when to retype or redraw
A successful trace turns lettering into filled outlines. It does not restore a font name, kerning settings or editable text. To change a word or reproduce precise typography, use an appropriate font in your editor and rebuild the text, or redraw the necessary paths.
Save both the source and the final SVG. For a logo, inspect every character, especially enclosed counters, punctuation and touching letters. For a plotter, remember that a thick outlined letter is not a single centerline stroke. Use the centerline explanation before treating two drawn edges as a tracing bug.